Welcome, Sign In        First time visitor? Create a New Account
Your cart is empty

Waters HPLC Spare Parts

 



Item Name Product Image Price

Waters 10 mm Flow Cell Rebuild Kit - WAS081346

The 10mm Flow Cell Rebuild Kit contains the following parts: two lens screws, one entrance lens washer, one entrance lens (curved), ten gaskets, one...
Waters 10 mm Flow Cell Rebuild Kit - WAS081346 £712.00

Add:

Waters 1525 EF Plunger Seal, 1/pkg - WAT026644 / 700002282

The 1525EF Plunger Seal helps maintain the pressure in the pump head. A damaged plunger seal will result in leaking from the pump head and needs to...
Waters 1525 EF Plunger Seal, 1/pkg - WAT026644 / 700002282 £42.00

Add:

Waters 25 µL Syringe - WAT077343

The 25µL syringe is an optional syringe for the 712, 715, 717/717 Plus Autosamplers, the LCM1, and the Separations Modules. Specifications ...
Waters 25 µL Syringe - WAT077343 £158.00

Add:

Waters 2690 Gradient Proportioning Valve (GPV) Assembly - WAT270927

2790/2795/2796 Separations Module This spare part is a genuine Waters Quality Part   Specifications PM Kit No Part Category ...
Waters 2690 Gradient Proportioning Valve (GPV) Assembly - WAT270927 £1,500.00

Add:

Waters 2690 Restrictor Loop - WAT270980

This spare part is a genuine Waters Quality Part Specifications PM Kit No Part Category Mechanical Product Category Separations...
Waters 2690 Restrictor Loop - WAT270980 £47.00

Add:

Waters 2695 Phase II Injector Assembly - 700002789

The new 2695 Injector Assembly includes only the new injector.To upgrade a 2695 to the new injector assembly, you must order both the new injector...
Waters 2695 Phase II Injector Assembly - 700002789 £1,580.00

Add:

Waters 2790 2795 Injector - 700000380

The 2790/ 2795 Injector is a fixed-loop Rheodyne injector valve which is mounted horizontally under the sample compartment. The injector valve...
Waters 2790 2795 Injector - 700000380 £2,930.00

Add:

Waters 2790 2795 Needle - 700000389

The 2790/2795 Needle is made from stainless steel. The needle can be used with pre-slit septa, sealing foils, or film without coring or needle...
Waters 2790 2795 Needle - 700000389 £408.00

Add:

Waters 2796 Filter Assemby, Inert - 405002117

The 2796 contains a new titanium inline filter assembly with a 2µ PEEK filter. Specifications PM Kit No Part Category Mechanical ...
Waters 2796 Filter Assemby, Inert - 405002117 £207.00

Add:

Waters 717 Sample Loop, 200µL - WAT045584

The 200µL sample loop is the standard sample loop that is installed in the 717 Plus Autosampler and it is also used in the LC Module 1. ...
Waters 717 Sample Loop, 200µL - WAT045584 £54.00

Add:

Waters ACQUITY UPLC Actuator 700002985

ACQUITY UPLC Actuator 700002985
Waters ACQUITY UPLC Actuator 700002985
Call for Price

... more info
Call for price

Waters ACQUITY UPLC Col. In-Line Filter Kit - 205000343

Waters recommends you filter buffers and samples using a 0.2µm filter prior to using ACQUITY UPLC™ BEH columns. Filtration protects the...
Waters ACQUITY UPLC Col. In-Line Filter Kit - 205000343
Call for Price

... more info
Call for price

Waters Alliance 2690 2695 2790 2795 Plunger Drive w/Seal Wash Assembly 700001031

Waters Alliance 2690 2695 2790 2795 Plunger Drive w/Seal Wash Assembly 700001031
Waters Alliance 2690 2695 2790 2795 Plunger Drive w/Seal Wash Assembly 700001031
Call for Price

... more info
Call for price

Waters Alliance Face Seals Replacement Kit, 4/Pkg - WAT270939

The Face Seal is made from a proprietary material available only from Waters®. It is used on the 2690/2695, 2690D/2695D and 2790/2790 Separations...
Waters Alliance Face Seals Replacement Kit, 4/Pkg - WAT270939 £154.00

Add:

Waters Alliance Plunger Seals Replacement Kit (Std-Yellow), 2/Pkg - WAT270938

Designed specifically for Waters® Alliance Solvent Management Systems, these standard plunger seals are made from a Waters proprietary material...
Waters Alliance Plunger Seals Replacement Kit (Std-Yellow), 2/Pkg - WAT270938 £104.00

Add:

Waters Analytical Cell Assembly, 10mm - WAT057919

The Analytical Cell Assembly has a Reverse Taper Beam flow cell design with a 10mm path length and a pressure rating of 1000psi. Specifications ...
Waters Analytical Cell Assembly, 10mm - WAT057919 £1,832.00

Add:

Waters Analytical Flow Cell - WAS081140

The Waters®TaperSlit™ Flow Cell design used in the 2487/2489 detectors renders the detector baseline insensitive to change in mobile phase...
Waters Analytical Flow Cell - WAS081140 £968.00

Add:

Waters Assembly, Plunger - WAS207069

Made from the highest quality sapphire, this plunger preserves the life span of the plunger seal. Precise roundness and smoothness tolerances...
Waters Assembly, Plunger - WAS207069 £374.00

Add:

Waters Assy, Cartridge Open Architecture, POD - 700004144

This spare part is a genuine Waters Quality Part. Specifications PM Kit No Part Category Mechanical Product Category Acquity ...
Waters Assy, Cartridge Open Architecture, POD - 700004144
Call for Price

... more info
Call for price

Waters Ball and Seat Inlet Check Valve - WAT033679

This valve assembly saves installation time and reduces the handling of small parts, as compared with the corresponding valve rebuild kit. The unit...
Waters Ball and Seat Inlet Check Valve - WAT033679 £247.00

Add:



Copyright © 2019 Interlink Scientific Services Limited - Suppliers and Maintenance of Chromatography Equipment & Consumables.
wabusiness template